Thursday, February 11, 2010

How do you get clear casting resin out of a ceramic mold?

I used a two part clear casting resin in a ceramic mold without release... is there anyway to get it out? seems too hard to break, is it safe to melt out, do i need to worry about fumes if i heat it? thanks for the help!How do you get clear casting resin out of a ceramic mold?
i would not burn it out but there must be a disolvant for it, check the components and make a search for something that can disolve it, the ceramic should be fine in most cases.





yes always worry about the fumes when burning something man made, or disolving it, do it a ventilated area, and away from open flames. i speak from experience really.





and remember the release agent if u cant get some, vaseline, or some oily soap solution may work just as well.

1 comment:

  1. I poured polyester casting resin into a glass bowl, but I cannot remove the cured resin from the bowl. What do you suggest to loosen it? I DID spray the releasing agent into the bowl before I poured the resin into it.

    ReplyDelete